100g Waterproof Agent Glue with Brush

 

Bullet Points:

1、Effectively Work: Waterproof Agent can easily solve the problem of water leakage. Clean the cover of the foundation before construction to ensure that the cover of the foundation is dry.
2、Waterproof: Our waterproof sealant is your quick and easy way to apply, seal, protect and prevent leakage! After drying, you can apply any color. It has high bonding strength, transparency, and non-yellowing
3、High Temperature Resistance: This Waterproof Anti-leakage Agent will not sag or drip under high temperature in summer, and the waterproof sealant will not crack or peel off in cold winter.
4、Long-lasting Effect: Waterproof Agent Contains quick-drying ingredients, easy to plaster, repair and seal. Waterproof sealant has a powerful solution and lasting effect. A waterproof layer can be formed after 24-48 hours, and the waterproof layer will become stronger over time
5、Wide Range of Use: Waterproof Anti-leakage Agent can be used for crack seepage, window sill seepage, toilet waterproof sealant seepage, wall seepage, roof seepage, exterior wall seepage.

 

Description

Waterproof Agent provides a strong but flexible protective layer for the applied cover. It has anti-leakage properties, can be used on wet surfaces with high bonding strength, is transparent, and has no yellowing. The waterproofing agent is heat-resistant and cold-resistant, and changes in hot and cold weather have no effect on the waterproof effect of the product. It is applicable in all regions.

Steps for Usage

1. Clean the base cover before construction to ensure that the base cover is dry and free of dirt. If there is a crack (more than 2 mm), it is recommended to repair it with a sealant first, and then use a waterproofing agent.
2. Spray or brush the product directly on the cover of ceramic tiles, floor tiles, wall tiles, cement, etc. Wait for the product to penetrate into the base layer. After a few minutes, when there is no liquid on the cover, spray twice or three times to enhance the effect. After curing for 24-48 hours, the waterproof layer can be formed, and the longer the time, the stronger the waterproof layer.

Note: In a low temperature environment, the waterproofing agent may solidify and become lighter. At this time, it can be used after boiling it with hot water.

 

Specification

Capacity:
 100g
Brush size: about 1.5*9.8cm/0.59*3.86in
Packing list:
1*waterproof agent
1*Brush